Model No.: FZG
Square and Round Vacuum Drying Machine Principle
Square Drying Machine and Round Drying Machine uses vacuum pump to pump damp air out and make the working chamber form vacuum status. Therefore, the drying speed of raw material is improved and the energy is saved greatly.
Notes: The solvent of raw material can be collected by using a condenser. If the solvent is water, the condenser is not required in order to save investment cost.
Vacuum Drier Equipment is suitable for drying heat sensitive raw materials that can decompose or polymerize or deteriorate at high temperature. It is widely used in pharmaceutical, chemical, foodstuff and electronic industries.
Square and Round Vacuum Drying Machine Features:
1.Under the condition of vacuum, the boiling point of raw material will decrease and make the evaporation efficiency higher. Therefore for a certain amount of heat transfer, the conducting area of dryer can be saved.
2. The heat is indirect. So the raw material can not be polluted. It is in conformity with the requirement of GMP. It is easy in washing and maintenance.
4. Machine materials : AISISUS304 , AISISUS316L, and other material .
5. For the electrical component , we mainly use international brand such as ABB ,Siemens or Schneider.
6.The heat source for evaporation may be low pressure steam or surplus heat steam.
The heat loss is less.
7.Before drying, the treatment of disinfection may be carried out. During the period of drying, there is no impurity material mixed. It is in conformity with the requirement of GMP.
8.It belongs to static dryer. So the shape of raw material to be dried should not be destroyed.
9. Smooth running, reliable performance, easy operation.
10. Highly polished inner and outer surfaces of the machine, no dead comer, easy to clear, no cross contamination. Confining to the requirement of GMP.
11. Lower energy consumption
12. Be clean for drying under the sealed condition.
13.The vaporization speed of liquid will be increased with declination of atmospheric pressure.
Tray type vacuum dryer rack
The drying rack of the tray dryer use to load the the baking tray; this drying rack not only holds the tray and also transfers heat directly to the baking tray of tray vacuum dryer. The interior of the rack is hollow; and the steam or hot water pass through the rack and transfers heat to the tray.Hywell machinery vacuum tray dryer have two types racks. one is a round tube type and the other is a plate type rack.
Round pipe drying rack
The round model drying rack is made of Seamless Steel Pipe; and the steam or hot water pass through the round pipe and transfer the heat to the drying tray and the interior of the whole vacuum drying machine to dry the material.
Because the round tube drying rack is composed of some Seamless Steel Pipes, there is a distance of 5-10 cm between each round tube, so when the baking tray is placed on the drying rack. The place of touches the baking pan that dry significantly faster than the place where it is not grounded. Some special materials cannot accept this kind of not uniform drying. Hywell machinery's engineers designed the cheapest solution for this issue. it use an independent baking tray support frame that put on the drying rack, and separate the baking tray to directly contact the round tube.the support frame use to solve the not uniform drying .
Under the condition of vacuum, the boiling point of material solution will reduce. It will increase impetus for heat and mass exchange. Therefore for certain heat exchange amount, it can save heat exchange area of evaporator.
The heat source for evaporating operation may be low pressure steam or waster heat steam (If having special requirement, customer may choose water or oil to heat. Our factory can design specially for you).
Heat loss of evaporator may be reduced.
Suitable for drying thermal sensitive material that is easy to decompose, polymerize or denature.
Before drying, it can carry out disinfections. During the period of drying, any impurity can't be mixed into it.
It is static vacuum dryer, the form and structure of material to be dried can't be damaged.
|Weight of drying chamer(kg)||350||800||1400||2100|
|Layers of baking shelf||4||6||8||8|
|Dimensions of baking tray(mm)||310x600x45||460x640x45||460x640x45||460x640x45|
|Number of baking tray||4||12||32||32|
|Temp inside chamber(ºC)||≤ 150||≤ 150||≤ 150||≤ 150|
|Vacuum at idle inside chamber(Mpa)||≥0.092||≥0.092||≥0.092||≥0.092|
|Type and power of vacuum pump if condersateor used||2X-15A 2KW||W3 5.5KW||W3 5.5KW||2X-70A 5.5KW|
|Tyoe and power of vacuum pump if no condersator used||SK-0.8 2.2KW||SK-3 7.5KW||SK-3 7.5KW||SK-3 7.5KW|
From drying machine, mixing machine to granulation machine, from unit machine to production line, we have them all. Hywell Machinery is a professional manufacturer of industrial dryer, powder mixing machine and granulator. Our flagship products include the drying oven, fluid bed dryer, belt dryer, vacuum dryer, rotary flash dryer, chamber drying machine, single dimensional mixer, three dimensional mixer, two dimensional mixer and high shear granulator, continuous granulator and so on. These high-performance machines have extensive applications within industries such as food, medicine and chemical. Sustained development and a strong emphasis on research and technology have bolstered our quality standards. we seek to achieve the highest level of customer satisfaction through professionally developed drying, mixing and granulation solutions. Hywell Machinery constant faith is providing perfect products to customer, excellenting service to customer !
In order to ensure quality of product, we focus on user 's requirements and control improvement and enhancement quality of products .The quality assurance mainly focus on the processes of ensuring production readiness inspection, control of raw materials and components, process control, critical parts, important parts of quality control, assembly quality control, process control testing, measurement equipment control. Pay close attention to the implementation of the quality assurance work, strictly to three inspection system of self-checking, mutual inspection, special inspection. The key point of Quality assurance is focuses on critical parts, important parts of quality control, the quality standards required by ISO9000 quality control procurement documents in order to clarify its status and acceptance of quality standards for company's re-inspections ; For critical parts and important that the key processes of identification and corresponding technical documentation, control by "the implementation of key quality control process", and complete, accurate and complete original records. Difficulties in quality assurance is a special process control, quality assurance is mainly painting, has developed a special process (painting) process documents, take the appropriate technical measures, to quality assurance.
In the production process, we pay close attention to quality control of each process. Every component, every process was strictly controlled. Enhanced the quality inspection process, the establishment of the necessary quality control point, the process by a full-time staff and quality inspector for inspection and supervision. Improved testing procedures and operating instruction.
Changzhou Hywell Machinery Co,.Ltd
Hywell Machinery is a market leader in one stop smart pharmaceutical production solution experts and your premier one stop solution pharmaceutical equipment manufacturer. Hywell Machinery main products include High Shear Granulator, Fluid Bed Dryer, Fluid Bed Processor, Fluid Bed Granulator, Vacuum Conveying, Bin Blender, 3D Mixer, Vacuum Dryer and so on.
Hywell Machinery custom design your project according to your process and layout requirements. As process equipment, we resolved a lot of process problems for clients during 20 years.
Hywell Machinery realized the application is key important, that is why we focus on integrating process and machinery, resolve your process problems.
Expertise from lab to production processes defined by your product. Hywell Machinery also have the laboratory machinery that include the lab granulator, lab powder mixer and lab drying machine.
Hywell Machinery has special kinds of dust-free solid dosage forms granulation lines and Powder mixing lines. Your process in mind innovation technology for special applications.
Hywell Machinery can improve process test service for your best equipment choice. Customize and design best equipment which satisfied with your process. Because only those who understand the process and know details can develop products that can do more than just the sum of individual components. Hywell Machinery support you in pharmaceutical, health product, food, fine chemical and feed processing through our international innovative process solutions.
Hywell customize all documentation related to the equipment, making easier the training, operation and maintenance of the equipment trough the life term even in the more exigent industries as the pharmaceutical market, we provide a complete set GMP documents including Qualifications(DQ,IQ, OQ,) , FAT, SAT, USER manual documentation. We perform the qualification executions as customer requests.
Our business sections are operating under the strict International Quality Standard of operation with control regulation certificate ISO9001 which is called the [International Quality Certifications".
Machine manufacturing is a very competitive business that demands continuing productivity improvements and cost reductions.
Hywell Machinery aiming to be the top-level pharmaceutical equipment manufacturer and supplier.
Passionate about our business, we are continually pushing the limits of our know-how to provide high-quality, innovative, and mixing, granulating, drying solutions for a host of international brands.
Welcome visit our factory at any time!
Hywell machinery Presence & Prospect
Hywell machinery company. is established as the professional manufacturer of industrial mixing, granulation, Drying equipment and system. Our state-of-the-art technology and know-how in this section is originally from China; along with the low labor cost advantage in China, Hywell machinery is born to be your partner for the cost effective solutions in powder mixing & powder granulation and drying system .
Hywell Machinery are not only able to offer the single machine with modern appearance and advanced technique, but also to offer the full line system to save your time, which is one of our strong points. With our engineers` decades of experience in this area, Hywell machinery is capable to offer the most suitable solution for any industry that has a demand for industrial Mixing & Granulation& Drying equipment.
What makes us so successful is our focus on sustainability through superior engineering. Our units are purposely over engineered to delivery superior performance, not just now for the current application, but for future applications. We know that being flexible and adaptable is key in creating a sustainable business as is superior customer service, support, and technology.
- Company Name: Changzhou Hywell Machinery Co,.Ltd
- Representative: Shally
- Product/Service: Drying Machine , Mixing Machine , Granulating Machine , Grinding Machine , Vibration Sieve , Coating Machine
- Capital (Million US $): US1.5 million
- Year Established: 2009
- Total Annual Sales Volume (Million US $): US$2.5 Million - US$5 Million
- Export Percentage: 81% - 90%
- Total Annual Purchase Volume (Million US $): Below US$1 Million
- No. of Production Lines: 3
- No. of R&D Staff: 11 -20 People
- No. of QC Staff: Fewer than 5 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 3,000-5,000 square meters
- Factory Location: Jianhu Industrial Park,Wujin District
- Contact Person: Mr. Jeff
- Tel: 86-0519-85786231
Premium Related Products